Dervish longboard deck from Loaded Carving Systems. With 76mm wheels and a lower center of gravity and a torsionally stiff design, the Dervishes are built to hold an edge and maximize energy return. A drop-thru carver designed to work with most reverse kingpin 180mm Trucks & 70mm+ wheels. The Dervish was designed and intended for speeds between 0 and 30 mph (0-50km/hr). You can take the board faster with skill and experience, but it is not intended for higher speeds due to its flex characteristics.

Flex 1: 170 lb - 230 lbs
Flex 2: 100 lb - 180 lbs







Features

- Length: 41.5"
- Width: 8.5"
- Wheelbase: 33"
- Weight:2.75 lbs (deck only)
-
- CONSTRUCTION: Epoxy and Tri-axle fiberglass sandwich a vert-lam Bamboo core, pressed into concave and convex cambers for liveliness, responsiveness and high energy potential.

Flex 1: 170 lb - 230 lbs

Tech Specs

Length: 41.5" / 105 cm
Width: 8.5" / 21 cm
Wheelbase: 31.5" / 80 cm
Deck Weight: 3.4 - 3.6 lbs / 1.55 - 1.65 kg
Rough Complete Weight: 7.6 - 7.8 lbs / 3.4 - 3.5 kg

Flex 1: 170 lb - 230 lbs
Flex 2: 100 lb - 180 lbs

Play around with kingpin tightness to adjust the looseness of the trucks. Bushings can be swapped out to adjust the ride as well. We recommend the Tracker Stimulators, and Bones Hardcore Bushings (although they are a little low for the randals). Be sure to find a wheel appropriate for your riding style and desired speed. Placing (cut to size) riserpads between the top of the deck and the truck baseplate will lower the board even further.